Lighting Problems Come in Three Types. Only One Is Our Job.

· Clara Whitmore

People call me when their lighting situation is urgent. I handle rush orders at a horticultural lighting company — 200+ emergency replacements over the past five years, including same-day turnarounds for commercial greenhouse clients.

Here's what I've learned: not every lighting emergency is actually an emergency. And not every lighting question belongs to us.

In March 2024, I got three calls in four hours. All three people described their situation as "urgent." Only one was right.

This isn't a pitch. It's a triage guide. Because the fastest way to waste money on lighting is to solve the wrong problem.

The Three Scenarios (And Why They're Not the Same)

Lighting isn't one category. It's at least three:

  • Commercial horticultural lighting — what we make
  • Decorative or event lighting — what most people picture
  • DIY and retrofit projects — where the rabbit holes live

Most buying advice ignores these boundaries. It treats "I need a light" as a single question. It isn't.

So before you buy anything, figure out which scenario you're in. The answer changes everything.

Scenario A: You're Growing Something Commercial

This is our territory. If you run a greenhouse or commercial grow operation and your lighting fails, the clock isn't just ticking — it's costing you a crop.

Two weeks before harvest is the worst time to lose a fixture. It's also, statistically, when it seems to happen.

When a grower calls me in that situation, I ask one question first: "What's currently hanging?"

If they're running Gavita HPS lights, replacement is usually fairly straightforward. The Gavita HPS platform is mature, widely stocked, and compatible with most existing controllers. You can often get a like-for-like swap within days.

If they're considering the jump to the Gavita RS 1900e LED — or already running one — the calculation is different. LED delivers efficiency over time, but the transition requires planning: voltage compatibility (120-277V or 208-480V depending on configuration), fixture spacing, and controller integration.

Here's the thing: an LED fixture is not a drop-in HPS replacement. It's a different system. If someone sells you one without asking about your setup, that's a red flag.

In February 2024, a commercial client called on a Thursday needing a replacement for a 1,000-square-foot flowering room by Monday. Normal lead time would have been two weeks. We found the right fixture through a regional distributor, they paid a modest rush fee, and the crop stayed on schedule. Missing that window would have meant delaying a $40,000 harvest.

That's an emergency. That's also our job.

Scenario B: Decorative or Event Lighting

This is where I start telling people, "That's not our strength — here's who does it better."

People call expecting us to stock cordless spotlights for weddings or Scandinavian chandeliers for a restaurant opening. We don't. And I'd rather point you to a specialist than sell you something we're not built for.

The urgency here is real — but different. A wedding with no uplighting is disappointing. A greenhouse with no light is a lost season.

If you're shopping for a cordless spotlight for an event, look at rental houses and event production companies first. They carry inventory, know what works in venues, and can usually deliver same-week. The same goes for a statement piece like a Scandinavian chandelier — that's a home decor or hospitality supplier, not a horticultural vendor.

I've made this mistake. In 2022, a client asked me to source a decorative fixture for a hospitality project. I spent a week chasing it down before admitting we didn't have the supply chain for it. I should have said "not our lane" on day one. That's the lesson: saying you can't help is faster than pretending you can.

Scenario C: DIY LED Strip Questions

"Where do I cut LED strip?" is one of the most common questions in home improvement — and it's completely outside our scope.

Never expected how often that question would come to a horticultural supplier. Turns out "where to cut LED strip" is a universal renovation question, and most people just search for whoever sells LED products.

LED strips are consumer electronics. They're sold in reels, cut along marked lines, and connected with clips. The cutting points are usually labeled — look for the copper pads or a scissors icon.

My standard advice: check the manufacturer's guide that came with your specific strip. There's no universal answer because voltage, density, and water resistance vary. Never cut where there's no marked line — you'll break the circuit.

Why am I answering this at all? Because people call us anyway. And I'd rather give a thirty-second answer and point them in the right direction than pretend it's a service we offer.

The best lighting suppliers know what they don't sell. If someone claims to handle commercial horticulture, event decor, and DIY electronics equally well, they're probably mediocre at all three.

How to Tell Which Scenario You're In

Ask yourself three questions. Be honest — the answers matter more than the price tag.

  1. Are you growing something? If yes — especially at commercial scale — you're in Scenario A. Get a specialist. If no, skip to question 2.
  2. Does the lighting need to perform or just look right? Events and decor need aesthetic expertise. That's a rental and staging world.
  3. Are you cutting, splicing, or retrofitting? That's a DIY question. Start with the manufacturer's documentation, not a lighting supplier.

I'll be honest: roughly half the people who call us belong in Scenario B or C. I used to think that was a problem. Now I see it as a filter. The people who stay are the ones we can actually help.

In my opinion, that's what expertise should look like. Not breadth of promises — depth in a specific lane.

To be fair, the instinct to find one supplier for everything is understandable. Budgets are tight, and consolidating vendors saves time. But I get why people try it; I just think the hidden costs — rework, wrong specs, missed timelines — are usually worse.

I learned this the hard way in 2021, when I tried to save a client's event by rigging a horticultural fixture in a venue. It worked — sort of — but the beam spread was completely wrong for the space. So glad the client caught it in a preview, because we were hours from a very public failure.

Since then, I've had one rule: if it's not what we do best, say so in the first minute. It saves everyone time. And it's the only way I've found to keep trust with the clients who actually matter to us.

This reflects our product lineup as of early 2025. Specifications and availability change, so verify current details before ordering.