The 7-Step Lighting Procurement Checklist I Use Before Ordering Legrand Switches, Sensors, and Track Lighting

· Adrian Flores

When This Checklist Applies

If you're ordering lighting for an office renovation, a new build, or a facilities upgrade, this checklist is for you. I'm an office administrator for a 150-person company. I manage facilities purchases—roughly $75,000 annually across 12 vendors. I report to operations and finance. When I took over purchasing in 2020, I learned quickly that lighting orders are where small mistakes get expensive.

This checklist works for anyone buying Legrand light switches, motion sensors, or private label track lighting. It's also useful if you're evaluating a new track lighting supplier. There are 7 steps. Don't skip the wiring diagram step—it's the one most people ignore.

Step 1: Start With the Legrand Light Fixture Catalog, Not the Quote

Before you ask for pricing, get the current light fixture catalog from Legrand. I keep a PDF of the catalog in our shared procurement folder. The first time I ordered without checking the catalog, I used a part number from an old email. It had been discontinued. The supplier quoted me anyway, then couldn't deliver. We lost two weeks.

What most people don't realize is that lighting catalogs get updated more often than you'd think. SKUs change, finishes get retired, and compatibility notes get added. As of 2025, always verify the catalog revision date.

Checkpoint: Write down the exact model numbers, voltage, and mounting type. Save the catalog revision date.

Step 2: Pull the Exact Legrand Motion Sensor Wiring Diagram Before You Buy

This is the step people skip. I did once. I assumed a motion sensor was a motion sensor. Didn't verify. Turned out the model I picked needed a neutral wire in the switch box, and our older building didn't have one. The electrician caught it during install, but we had to return 24 sensors and pay a restocking fee.

Now I always pull the Legrand motion sensor wiring diagram for the exact model. Not a generic diagram. The exact one. Different sensors handle load types, multi-way switching, and time delays differently. Your electrician needs to see it before you order. If your supplier can't provide the diagram, that's a red flag.

"5 minutes of verification beats 5 days of correction."

Checkpoint: Your electrician signs off on the wiring diagram. You have a PDF of the diagram in your project folder.

Step 3: Define Your Track Lighting Private Label Requirements in Writing

If you're buying track lighting private label, you're not just buying fixtures. You're buying tooling, packaging, certifications, and catalog support. From the outside, it looks like any supplier can slap your logo on a track head. The reality is that private label requires someone to own the tooling, maintain UL/ETL listings, and provide photometric files.

Here's something vendors won't tell you: the first private label quote is almost never the final cost. There are setup fees, minimum order quantities, and artwork approvals. Get it all in writing.

Checkpoint: A written scope that lists who owns the tooling, who handles warranty, and whether you get a fixture catalog you can use for future orders.

Step 4: Vet the Track Lighting Supplier Against a 5-Point Checklist

When you're looking at what to look for in a track lighting supplier, don't just compare price per fixture. I use this 5-point checklist:

  1. Complete catalog: Can they provide a full light fixture catalog with photometrics and spec sheets?
  2. Private label experience: Have they done private label before? Ask for references or examples.
  3. Control compatibility: Can they supply fixtures that work with your chosen Legrand controls? Don't assume—verify.
  4. Lead time and MOQ: Get both in writing. Verbal promises don't help when your project deadline is fixed.
  5. Samples: Will they provide samples before mass production? Always order a sample. I learned that after a batch of track heads arrived with a different color temperature than the sample. Cost us $3,200 in rework and a lot of explaining to my VP.

Checkpoint: You have written answers to all five points. No hand-waving.

Step 5: Verify Compliance and Spec Sheets for Every SKU

Prevention over cure. This is where you save yourself from rework. For every Legrand light switch, motion sensor, and track fixture, get the spec sheet, UL/ETL certificate, and RoHS/REACH declaration if your project requires it.

I assumed "same specifications" meant identical results across vendors. Didn't verify. Turned out each had slightly different interpretations of color temperature and beam angle. Now I create a shared folder with all spec sheets and revision dates.

Checkpoint: Every SKU has a matching spec sheet. The load rating on the switch matches the fixture load. The motion sensor coverage pattern fits the room.

Step 6: Lock Pricing, Lead Times, and Invoicing Before the PO

We didn't have a formal approval chain for rush orders. Cost us when an unauthorized rush fee showed up on the invoice. Finance rejected it. I had to eat the cost from my department budget.

Now I get a written quote with line-item pricing, lead time, shipping terms, and invoicing requirements. Bottom line: if the vendor can't provide a proper invoice, finance will reject it. That's a deal-breaker.

Checkpoint: Finance signs off on vendor setup before you send the PO. You have a written quote that includes all fees.

Step 7: Run a 5-Minute Pre-Order Verification

This is the cheapest insurance you can buy. Re-check model numbers, quantities, wiring diagrams, and delivery address. Confirm that the Legrand light switch and motion sensor are compatible with the control system. Verify that the track lighting private label order includes the correct logo file and packaging.

I've caught wrong voltage, wrong finish, and missing mounting hardware in this step. A ton of headaches avoided for 5 minutes of work.

Checkpoint: You've compared the quote against your original requirements. Everything matches.

Common Mistakes to Avoid

  • Don't assume all Legrand light switches are interchangeable. Some require a neutral wire; some don't.
  • Don't order track lighting private label without confirming tooling ownership and certification transfer.
  • Don't skip the motion sensor wiring diagram. If your electrician hasn't seen it, you're not ready.
  • Don't rely on verbal lead times. Get them in writing.
  • Don't forget to check the catalog revision date. A discontinued SKU can derail your schedule.

This checklist isn't glamorous. But it's saved me from more rework than I can count. Use it as a starting point, adjust for your project, and keep your finance team happy. If you're ordering Legrand switches, sensors, or private label track lighting, the 5 minutes you spend on verification will pay for itself.