Ordering Legrand Light Switches, Occupancy Sensors, and Ceiling Fixtures: A 9-Step Checklist

· Linh Tran

Who this checklist is for

“Office administrator for a 180-person company. I manage all facilities and MRO ordering—roughly $220,000 annually across 9 vendors. I report to both operations and finance.” That's my job in one sentence. The practical version: when a switch dies in the east wing, or a conference room needs a sensor that actually shuts the lights off, I'm the one placing the order.

Since 2020 I've placed somewhere north of 240 lighting and controls orders—Legrand light switches, wall occupancy sensors, LED troffers, exit signs, and the long tail of small parts that keeps three buildings running. This is the checklist I run before I hit submit on a purchase order. Nine steps. Most take under ten minutes.

It's written for anyone who orders lighting hardware for a distributor, a school, a plant, or an office portfolio. If you're buying a single switch for your kitchen, it's overkill. Just buy the switch.

The 9-step checklist

1. Walk the space before you open a catalogue

Ceiling height, ceiling type (2×4 lay-in, 2×2, surface mount, open plenum), how many switch legs, how the switch is wired, and whether there's a neutral in the box. I take one wide photo and one photo of the switch box with a tape measure in frame. That second photo has saved me two returns.

Why the neutral matters: most commercial-grade wall occupancy sensors and dimmers need one. Plenty of older switch loops don't have it. If yours doesn't, your $40 sensor becomes a $300 electrician visit plus drywall. Better to find out on a Tuesday afternoon than on install day.

Checkpoint: You can describe the room in one sentence—dimensions, ceiling height, ceiling type, switch legs, neutral yes or no—and you have photos to back it up.

2. Decide the control strategy before you pick a product

Occupancy or vacancy? Auto-on or manual-on? Full-on or partial-on? These aren't preferences, they're sometimes code requirements. California's Title 24, Part 6 restricts auto-on across a long list of space types. ASHRAE 90.1-2019, Section 9.4.1 requires automatic shutoff for a specific list of space types. Even on an unpermitted project, those standards are a decent proxy for what a facilities director or an inspector will expect.

If your project is permitted, the inspector is checking your controls, not your fixtures. So get the strategy in writing before anyone orders hardware. One paragraph, sent to whoever signs off.

Checkpoint: A written line like “Vacancy sensors, manual-on, in private offices; occupancy sensors with partial-on in corridors and restrooms.” No product names yet.

3. Get the electrical details right the first time

Voltage is the number one reason lighting hardware gets returned. 120V and 277V look identical on the shelf and are not interchangeable. Then box depth. Then load type.

Load type is where people get surprised. Modern LED drivers pull high inrush current for a fraction of a second at power-up. A relay that's perfectly happy with 800W of incandescent isn't necessarily rated for 800W of LED. Check the LED and CFL load rating on the datasheet, not just the general rating.

And write the full part number, suffix included. Part-number suffixes aren't decoration. On the switch and sensor lines I buy, one character can mean 120V instead of 277V, a different coverage pattern, or a different mounting type. (Mental note: this is where I've made my most expensive typos.)

Checkpoint: Full part number with suffix, voltage, and load rating on one line, compared against the photo from Step 1.

4. Match the coverage pattern to the room shape, not the square footage

This is the step almost nobody does, and it's why conference room lights turn off while six people are sitting still.

Manufacturers publish a square-foot coverage number. It's technically true and practically misleading, because detection depends on room geometry and the shape of the sensor's zones. A 360° ceiling sensor rated for 1,000 sq ft in a square room can miss most of a 40-foot corridor or a room with a pillar mid-span. NEMA WD-7, the occupancy motion sensor standard, defines how those coverage patterns get tested and published. Ask for the coverage diagram PDF, not the headline number.

Also: passive infrared sensitivity drops with mounting height, and it handles slow-moving or seated people poorly. Ultrasonic or dual-technology sensors cover both better, at a few dollars more and with a slightly higher false-trigger risk from HVAC airflow.

Checkpoint: You have the manufacturer's coverage diagram and you've drawn your room outline on it.

5. Lock the dimming protocol before you buy anything

0-10V, DALI, phase-cut, or a closed wireless ecosystem. Pick one and put it on the order. Mixing protocols is how a project ends up with fixtures that turn on but won't dim, and nobody notices until the ceiling grid is closed.

One thing that surprised me: “0-10V” on two spec sheets doesn't guarantee a happy marriage. The interface is defined in IEC 60929 Annex E, and sink current and control range vary by driver. Some control devices are current-sinking, some are current-sourcing. Usually it works out. I've had one batch that didn't, and the fix was swapping 14 sensors.

Checkpoint: Protocol for fixtures, protocol for controls, and written confirmation from the supplier that they match.

6. Pull the submittal package before you cut the PO

Spec sheet, cut sheet, UL listing, and—if you're chasing a utility rebate—a DLC listing. Anything wireless needs FCC Part 15 documentation. For luminaires, that's UL 1598. For energy management equipment like sensors, UL 916.

Why before the PO? Because a light fixture supplier who can't produce a submittal package in a day is telling you something about how they'll handle a warranty claim in month fourteen.

Checkpoint: PDFs saved in a folder under the project name, before the PO number is issued.

7. Price the order, not the unit

Unit price is the least interesting number on a lighting quote. What matters: freight, minimum order quantity, restocking fee, lead time, and whether the price includes the mounting hardware the spec sheet assumed.

On occupancy sensor wholesale cost, here's what I saw in distributor quotes between September and December 2025, for a mid-size commercial account. Treat these as ballpark, not gospel:

  • Wall-box PIR vacancy sensor, 120/277V, commercial grade: $28–$46 each at 50+ pieces
  • Dual-technology wall sensor (PIR + ultrasonic): $62–$118
  • Ceiling-mount 360° PIR with low-voltage power pack: $55–$95 for the sensor, plus $18–$30 for the pack
  • Fixture-integrated or high-bay sensor: $70–$160

Fixture side, same period: DLC-listed 2×4 LED troffers with 0-10V dimming ran $48–$95, 2×2s ran $38–$80, and 6-inch downlight retrofits ran $22–$48. Those are list-ish numbers for a small account. Ceiling light wholesale pricing at 500+ units can be 15–30% lower, but confirm it's the same product tier and not a swapped driver. As of early 2026, LED pricing has been flat to slightly down, but freight hasn't.

Here's something distributors won't tell you directly: the first quote is rarely the final price. Wholesale tiers usually depend on account setup and order frequency, not the size of one order. If you're going to buy lighting four times a year, say so before you ask for pricing.

Checkpoint: A total landed cost per line item. Freight included. Unit price alone doesn't count.

8. Verify the supplier can invoice you properly, before you order

In 2022 I found a great price on 120 ceiling sensors through a broker. $3,100 order, delivered on time, worked fine. The receipt was handwritten. Finance rejected the expense report and my department budget ate the difference. I don't blame finance—the paperwork didn't meet audit requirements. Full stop.

Now I ask for three things before any new supplier gets a PO: a sample invoice, a W-9, and confirmation they'll put our PO number on the invoice. If they can't do all three, I don't care how good the price is.

Checkpoint: A real sample invoice in your inbox with a PO number field on it.

9. Buy a pilot before the rollout

Two sensors. One fixture. Install one of each in the actual space and leave it there for a week—including a Friday afternoon when the room is half empty and people are moving slowly.

Spec sheets describe ideal conditions. Buildings have supply diffusers, glass walls, direct sun, and people who sit very still. A week of real use costs almost nothing and catches most of what a datasheet won't.

Checkpoint: One week, one room, written notes on false-offs, false-ons, and dead zones.

Common mistakes (mine included)

  • Ordering sensors before deciding occupancy versus vacancy. The product follows the strategy, not the reverse.
  • Trusting the square-footage coverage number without the diagram.
  • Missing the neutral wire requirement. Single most expensive small mistake I've made.
  • Assuming two “0-10V” products are compatible without written confirmation.
  • Forgetting that mounting hardware, power packs, and trim rings are often sold separately.
  • Skipping the sample invoice. See the $3,100 lesson above.

Where this checklist has limits

This worked for us, and our situation is specific: 180 employees, three buildings, mostly standard office and light-industrial space, no theatrical or architectural dimming, no networked control system beyond wall sensors. If you're specifying a DALI-2 network, running a school district with 40 sites, or buying wholesale to resell, the calculus is different—you probably have an account rep and a specifier doing steps 4 and 5 for you. I've been on the buying side of exactly one private-label deal, and my takeaway was that minimums and lead times change the math completely; the rep quoted a 500-unit minimum and a lead time that went from about two weeks to ten.

I also want to be honest about what I don't know. I don't have hard data on industry-wide return or defect rates. What I can say anecdotally, from roughly 240 orders, is that about 8–12% of first deliveries have something wrong with them. Almost never defective. Wrong. Wrong voltage, wrong suffix, wrong quantity, missing mounting hardware. Nearly all of it was catchable at the ordering step.

And one thing I'd push back on. Everything I read when we started said dual-technology sensors were overkill for open office space—plain PIR was fine. In practice, on our 9-foot ceilings with supply diffusers near the walls, the PIR-only units were false-offing often enough in winter that our facilities tech was making monthly trips. The dual-technology units cost more upfront and generated fewer complaints. Not a dramatic finding. Just a reminder that “overkill” depends on your ceiling.

Five minutes of verification beats five days of correction. That's the whole checklist in one sentence, and it's the only reason I still use it.