Here's a question I get a lot from distributors and OEM buyers: 'Should I buy Legrand branded controls, or should I put my own label on them?'
I understand the temptation. A private label sounds like a way to build your own margin and stop competing on price comparison. But there isn't one correct answer. The right call changes depending on whether you are filling a specified job, building a brand, or integrating a sensor into a product you manufacture. I learned this by making expensive mistakes, so this article is basically the checklist I wish someone had given me in 2017.
To be clear about where I sit: I am a channel manager at Legrand now, but I spent my earlier years on the order desk at a distributor. I have personally made and documented eleven significant sourcing mistakes, and they totaled roughly $21,000 in rework and delays. The first one happened because I treated OEM and private label as the same thing. They are not.
First: Branded vs. OEM vs. Private Label
You cannot make a smart call if the terms are vague. Here is how I use them when buyers ask.
- Branded: a finished lighting control manufactured and sold under the manufacturer's name. A Legrand light switch is a good example. The spec, listing, support, and brand story stay with Legrand.
- Private label: a finished lighting control sold under your name. This is what people usually call lighting controls private label. The factory makes it, but the product marking, package, and warranty point to you.
- OEM: a component or subassembly that goes into another product you make. An occupancy sensor mounted inside your LED fixture is OEM hardware. The buyer does not shop for it as a separate retail item.
The fastest way to separate OEM from private label: if it can sit on a shelf and be sold as a finished product, it is branded or private label. If it disappears into your own product and is tested with your assembly, it is OEM.
That is why the motion sensor OEM vs private label question is really a product roadmap question. The sensor itself is not choosing; you are choosing which company owns the finished product.
Scenario 1: The Spec Says Legrand. Keep It Legrand.
Here is the easiest scenario: the brand is already written in the project documents. If an engineer writes Legrand triple light switch into the specification, do not treat that as an invitation to prove private label saves money. Use the Legrand triple light switch.
A specified product does more than switch light. It carries an approval. The specifier picked that brand for a reason. The electrical contractor knows what the inspector will look for. A substitution, even one with a lower landed cost, can stop a submittal, fail a rough-in inspection, or end up in a pile of unused boxes.
I made this mistake on the distributor side in 2019. I recommended a substitute because the Legrand SKU had a longer lead time. The product worked, but the job specification said Legrand. The contractor had to replace 400 installed devices and pay for the labor twice. That error had nothing to do with quality. It was a brand-decision error.
So when a customer asks for a Legrand light switch because they are restocking or maintaining an existing installation, fill it with the Legrand part. If the order says Legrand triple light switch, the Legrand triple light switch is the only product that fully answers the order.
Scenario 2: Lighting Controls Private Label Is a Product Decision, Not a Price Decision
Private label lighting controls are not a bad idea. They are just a much larger idea than most buyers expect. If you want to sell a finished switch or sensor under your own brand, you are not merely buying inventory. You are creating a product line.
Lighting controls private label makes sense when you have a customer base that trusts your name, you can support the line with technical help, and you have enough volume to carry packaging, certification, and reorder costs. It also makes sense when you want the long-term benefit of owning the customer relationship.
But do not believe that private label is automatically cheaper. The first time I compared a branded motion sensor with a private-label motion sensor, I expected private label to win on unit price. It did not at the monthly volume we had. It would have won only if we nearly doubled the commitment. The lesson: private-label value is brand ownership, not a magic discount.
Private label also creates invisible work. The most expensive private-label mistake I made happened in 2021. We changed the brand name on a product and skipped the step where the certification file had to be updated for the name printed on the product. The factory produced 2,000 units. We stopped the shipment, corrected the file, and ate $1,150 in labor and a week of lead time. If you sell a private-label product, the label on the box is the point. Approve it as carefully as you would approve a new product.
And if your private-label packaging makes an environmental or energy claim, remember the FTC Green Guides (ftc.gov/green-guides). You are the advertiser. The claim has to be supported, because your brand is on the box.
Scenario 3: Motion Sensor OEM vs. Private Label
This is the category that confused me in my first year. A motion sensor can be a retail product or a hidden component. The two versions may even be built on the same core design, but they are bought differently.
If you are building a fixture that has occupancy sensing as a feature, you need OEM. You care about mechanical dimensions, electrical ratings, ambient temperature, driver compatibility, and wiring. You do not especially need a retail box with consumer instructions.
If you are selling a boxed motion sensor through your own catalog, that is private label. You care about shelf appeal, clear instructions, recognized certifications, and support paths. It can be the same factory, but it is a different relationship.
Spotlight wholesale buyers often fall into this trap. A company builds its own-brand LED fixture line and then wants to add sensors for complete luminaires. That sounds like private label, but integrated sensors are OEM. On the other hand, a distributor that wants to sell a brand-name sensor beside its wholesale spotlights should choose branded or private-label final goods. The wrong choice only appears after the first customer asks, 'Where is my installation guide?'
My 2018 mistake was buying OEM sensors for a customer who needed private-label ones. The product itself was appropriate for the fixture. But the customer's plan was to sell the sensor separately as an accessory. It had no branded packaging, no retail story, and no support plan. We wasted two weeks and roughly $800 on samples and labels before the customer admitted they needed finished goods.
Which Scenario Are You In?
Use this quick check instead of trying to solve all four scenarios at once:
- Is your order driven by a specification or P.O. that says Legrand? Then buy branded. If the project calls for a Legrand triple light switch, use the Legrand triple light switch.
- Are you selling finished controls under your own name? Then lighting controls private label is your world. Budget for certifications, packaging, support, and brand management.
- Are you putting the control into a product you manufacture? Then use OEM. Provide real specs, not just a sample, and test the finished assembly.
Still not sure? Start with branded. That is not a lazy answer. Branded inventory is easier to move, it has factory support, and you will learn what your customers actually order before you invest in custom marking and compliance files. Private label is a strategic project. OEM is an engineering decision. Branded buying is the operational default until you know which of those two projects you are ready for.
The industry has changed a lot since I started in 2017. Manufacturers are more flexible about private-label and OEM partnerships than they used to be, and buyers have more options. But the fundamentals have not changed: a lighting control has to be properly listed, properly rated, and properly installed. What has changed is that you have more ways to get that wrong.
The good news is that the decision is simpler than the sales hype makes it sound. If the spec says Legrand, respect it. If the product says you, build the system for it. If the component makes your product, engineer it. That clarity is worth more than the price difference on any one order.