-
1. What's the difference between a Legrand light switch and a Legrand occupancy sensor switch?
-
2. Can a Legrand occupancy sensor switch handle LED downlights and ceiling fixtures?
-
3. Do Legrand occupancy sensor switches require a neutral wire?
-
4. When should an OEM buyer choose a branded Legrand switch instead of a private-label option?
-
5. How do I vet a commercial lighting distributor or downlight manufacturer for rush orders?
-
6. What hidden costs should I watch for when comparing downlight manufacturer quotes?
-
7. What's the #1 mistake people make with occupancy sensor switches?
-
8. How far ahead do I need to order Legrand switches, sensors, and fixtures?
If you're sourcing Legrand switches or occupancy sensors for commercial projects, you already know the basic specs. The questions that keep distributors up at night are more about lead times, hidden fees, and what happens when the order shows up wrong. In my role coordinating lighting controls for distributors and OEM/private-label buyers, I've handled 200+ rush orders in six years—same-day turnarounds for a hospital, an urgent replacement for a hotel that lost a floor of lighting, that kind of thing. This FAQ is the version I give buyers when they want real answers, not a spec sheet.
1. What's the difference between a Legrand light switch and a Legrand occupancy sensor switch?
A standard Legrand light switch gives you manual control. You press it, the lights turn on. An occupancy sensor switch adds automatic detection—typically passive infrared, or a dual-tech sensor that also picks up fine motion.
If you're quoting a code-compliant commercial job, the sensor switch matters because energy codes like ASHRAE 90.1 and IECC require automatic shutoff in many spaces. But don't assume one sensor fits every room. A sensor designed for a small office has a different coverage pattern than one for a warehouse aisle.
The practical difference for you as a distributor is inventory. Switches are simple SKUs; sensors carry more variables. Coverage, mounting height, voltage, neutral requirement, and load type all change the part number.
2. Can a Legrand occupancy sensor switch handle LED downlights and ceiling fixtures?
Usually, yes—but 'usually' is doing a lot of work. LED drivers have inrush currents and leakage current that can confuse an older sensor. If the sensor isn't explicitly rated for LED load, you can get blinking lights, false trips, or early failure.
Before you quote a ceiling fixture with a sensor switch, I'd ask three things: Is the switch listed for LED loads? Does it require a neutral? What's the actual inrush rating? That third one is easy to miss. I've seen a room of twenty downlights look fine on paper and then trip a sensor's relay on the first test.
So, compatibility isn't one line in a brochure. It's about the driver, the number of fixtures, and the sensor relay's rating.
3. Do Legrand occupancy sensor switches require a neutral wire?
Most of the current ones do. If you're replacing a single-pole switch in an older building, there's often no neutral in the box, and that turns into a retrofit surprise. Check the product spec before you quote the job. Some no-neutral options exist, but they usually have a lower load limit or a different wiring setup.
For a distributor, this is more than a technical detail. It affects which SKUs you stock. I've seen project delays because someone ordered 200 sensor switches and then discovered the installation site only had two wires in every box.
4. When should an OEM buyer choose a branded Legrand switch instead of a private-label option?
Private label makes sense when you need your own brand on the wall, custom packaging, or a specific color faceplate. A branded switch makes sense when the spec calls out a name, or when the project schedule is too tight for custom manufacturing.
Here's where transparency comes in. Some suppliers quote a private-label program as if it's simple. Then you find out about engraving minimums, packaging artwork fees, and extra lead time. I'm not saying private label is a trap—I've done plenty of those orders. But I've learned to ask 'What's NOT included?' before asking 'What's the price?' The vendor who lists all costs upfront, even if the total looks higher, usually costs less in the end.
5. How do I vet a commercial lighting distributor or downlight manufacturer for rush orders?
Start with their cutoff times, not their promises. Cutoff time is the line between 'ships today' and 'ships tomorrow.' A distributor that says 'we understand urgent' but has a 2pm cutoff in a different time zone isn't going to save you at 4pm.
Then ask about their restock policy and freight contingency. If an order arrives damaged, do they cross-ship before the return lands? That matters more than most buyers think. Once I had a rush order for 120 downlights; the truck arrived with a damaged pallet. The distributor cross-shipped 36 replacement units overnight and took the damaged ones back on the next run. The project stayed on schedule. That relationship was worth more than the two other quotes I had that were slightly cheaper.
Compare that to a different job where I saved $800 with a low quote and then lost a day arguing about who pays return freight. The juice wasn't worth the squeeze.
If you're a ceiling light distributor evaluating a new downlight manufacturer, run this test before you need it: place a small dummy order and see how they handle a change order. That tells you more than any sales pitch.
6. What hidden costs should I watch for when comparing downlight manufacturer quotes?
Look for these before you sign:
- Tooling or setup fees, especially for custom trims
- Minimum order charge that's buried in the line items
- Shipping terms that exclude liftgate or residential delivery
- Sample fees that get waived only after you place a full order
- Warranty claim freight costs
The 'always get three quotes' advice ignores the transaction cost of evaluating the fourth vendor and the value of a relationship where you already know their quirks. Get quotes, sure. But compare total cost, not unit price.
7. What's the #1 mistake people make with occupancy sensor switches?
Assuming one sensor works for both a small office and a conference room with a long table. The coverage pattern of a ceiling-mounted sensor is not a perfect circle on the floor—it's a kind of elongated shape that depends on mounting height and lens. If you mount it wrong, you get a dead spot right where someone sits.
I've also seen buyers order a sensor switch thinking it controls a daylight harvesting system. That's a different product. If you need dimming based on daylight, say that early. It changes the spec and the price.
8. How far ahead do I need to order Legrand switches, sensors, and fixtures?
For standard Legrand light switches in stock, two to three days is realistic. For an occupancy sensor with a specific coverage pattern, add a week. For OEM/private-label downlights, plan on four to six weeks. Maybe six—if there's custom color or driver tooling, it can push past eight.
But the real answer is: it depends on your buffer. I've learned to keep a 48-hour buffer on anything tied to a deadline. It took me four years and about 150 orders to stop treating lead time as a target and start treating it as a promise. When a client calls on Tuesday for a Thursday install, I'd rather say 'we can, but we'll need to pay for expedited freight' than 'we can, no problem.' That's not pessimism—it's how I sleep at night after the freight does something dumb.