-
Who This Checklist Is For
-
Step 1: Lock the Compliance Requirements Before You Talk Price
-
Step 2: Match the Switch to the Load, Not the Catalog Photo
-
Step 3: Verify Sensor Coverage Geometry (The Step Most Buyers Skip)
-
Step 4: Pressure-Test the Private-Label Terms
-
Step 5: Get a Written Delivery Date, Then Add a Buffer
-
Step 6: Ask the Boring After-Sale Questions
-
Step 7: Sanity-Check With a Sample on the Real Load
-
Common Mistakes That Cost You the Deadline
-
Where This Checklist Falls Short
Who This Checklist Is For
If you source lighting controls for a distributor, a wholesale house, or an OEM/private-label program—and you're working against a deadline—this is the sequence I run. Seven steps, roughly in the order I use them when a rush order lands on my desk.
In my role coordinating expedited orders for a lighting distributor, I've handled 200+ rush jobs over six years: same-day turnarounds for contractors, weekend pulls for specifiers, and more than a few 48-hour scrambles when a client's original supplier dropped the ball.
One caveat up front: if you're replacing two switches in your own kitchen, this list is overkill. This is built for buyers moving pallets, not homeowners moving a screwdriver. And it's built for the projects where a missed date has a dollar figure attached.
Step 1: Lock the Compliance Requirements Before You Talk Price
Most buyers open with price. That's the step that costs them later.
Ask for the compliance sheet first. Depending on the project, that means UL listing, DLC listing, Title 24 (California's efficiency rules, which apply to occupancy sensing in certain space types), RoHS, and—if the product makes any energy claim—the substantiation behind it.
Per FTC Green Guides (16 CFR Part 260), environmental and energy-efficiency claims must be backed by competent and reliable evidence. A supplier who can't hand you the test data behind a two-digit energy savings claim is a supplier you probably shouldn't quote.
Checkpoint: You have a written compliance sheet with standard numbers, issuing bodies, and dates. Not a PDF with a logo and the word 'certified.'
Step 2: Match the Switch to the Load, Not the Catalog Photo
A Legrand light switch family that works cleanly on a 60W incandescent load may misbehave on a 6W LED. Not always. But often enough that load matching is the second thing I check, right after compliance.
Three things to confirm before you quote a customer:
- Load type—LED, CFL, incandescent, or mixed
- Min and max load rating—on LED circuits, the minimum usually matters more than the maximum
- Dimming protocol—line-voltage phase-cut, 0-10V, DALI, or an ecosystem-specific approach (like the residential families Legrand builds around adorne or radiant)
Never expected how often a 'compatible' dimmer fails on a low-wattage LED. Turns out the minimum load rating is the spec that decides whether you get silence or flicker—and flicker complaints come back as returns.
Step 3: Verify Sensor Coverage Geometry (The Step Most Buyers Skip)
Here's the one almost everyone skips: coverage geometry. An occupancy sensor's spec sheet might claim 2,000 square feet. In a warehouse aisle with racking, or an open office with half-height partitions, that number is likely optimistic by a wide margin.
For anyone writing an occupancy sensor distributor buying guide, the questions that actually matter are:
- Sensing tech—PIR, ultrasonic, or dual-technology
- Mounting height and angle—ceiling, corner, or wall
- Pattern shape—360°, wide-angle, or corridor
- Dead zones—near HVAC vents, doorways, and shelving
Then there's the setting most buyers never touch: time delay and sensitivity. A sensor set to a two-minute delay in a stockroom will drive employees crazy. The same sensor set to twenty minutes in a corridor will waste energy and generate complaints. Neither of those is a product defect—but both show up as RMA requests.
Checkpoint: Overlay the coverage pattern on the actual floor plan before you order. Ten minutes here prevents a callback that takes ten days.
Step 4: Pressure-Test the Private-Label Terms
If you're exploring smart lighting private label, the commercial terms matter more than the product photos. Get these in writing:
- MOQ (minimum order quantity) per SKU and per finish
- Tooling and setup fees—one-time or amortized
- Certification ownership—whose name is on the UL file number
- Label and packaging artwork—who approves changes, who pays for them
- Firmware and app control—who can push updates, and who can strand your inventory with a bad one
Ask who owns the UL file number. If it's the factory's, you're one factory decision away from a delisting that turns your stock into scrap.
Step 5: Get a Written Delivery Date, Then Add a Buffer
Last quarter alone, we processed 47 rush orders with 95% on-time delivery. The 5% that slipped had one thing in common: a verbal delivery promise.
Ask three questions, in this order:
- When does production start?
- When does it ship?
- When does it land at the dock?
Then add a buffer—think 20-30% longer than the estimate (like three extra days on a ten-day lead time). To be fair, some suppliers pad their dates on purpose, so the buffer cuts both ways. But when a deadline has a penalty clause attached, the buffer is cheap insurance.
One more thing on timing: if the exact SKU isn't available, ask what the closest functional substitute is. A slightly different finish or a comparable sensor with a wider pattern often ships in a fraction of the time. That trade is sometimes better than waiting.
Step 6: Ask the Boring After-Sale Questions
Granted, nobody wants to negotiate return terms on a rush order. But the cost of skipping this step shows up six months later, when the first batch fails in the field.
Get answers to:
- RMA rate—what percentage comes back, and why
- Warranty length and terms—counted from ship date or install date
- Return freight—who pays, in both directions
- Restocking fees—and whether they apply to defective units
None of this is exciting. All of it decides whether the project is profitable when the dust settles.
Step 7: Sanity-Check With a Sample on the Real Load
If the deadline allows, order one unit and test it. On the actual load. In the actual circuit where it will live—whether that's a wall switch, a ceiling sensor, or a spotlight fixture on the same dimmer.
I'm not a certified electrician, so I can't speak to wiring methods or code interpretation. What I can tell you from a sourcing perspective is this: a five-minute bench test beats a two-week dispute about whether the flicker is 'normal.'
Checkpoint: On the sample, confirm the part number on the label matches the spec sheet, the packaging matches your private-label artwork, and the unit behaves on the load you're actually going to sell it into.
Common Mistakes That Cost You the Deadline
- Comparing unit price only. Total cost of ownership (i.e., unit price plus compliance, freight, RMA, and downtime) is the number that matters.
- Skipping the coverage overlay. Sensor returns are expensive and mostly avoidable.
- Accepting a verbal delivery date. Always get it in writing, with a name attached.
- Forgetting to ask who owns the certification. This one bites private-label buyers hardest.
- Assuming 'compatible' means compatible with your load. Check min and max ratings, not just the logo on the box.
Where This Checklist Falls Short
Legrand's range is broad—switches, sensors, dimmers, controls, fixtures—and their spec and compliance support is one of the reasons they keep showing up on BOMs. But broad isn't infinite. If your project calls for a protocol or form factor outside their catalog, forcing the fit will cost you more than sourcing elsewhere.
And if lowest unit price is your only decision criterion, this checklist probably isn't for you. It's built for buyers who measure cost in compliance, deadlines, and callbacks—not just dollars per unit.
Honest limitation, said plainly: no single supplier is right for every project. The trick is knowing which items on this list you can't skip, and which ones you can trade for speed.