-
When This Checklist Helps
-
The Six-Step Ordering Checklist
-
1. Write down the exact Legrand catalog number, not just 'Legrand switch'
-
2. Check code and program compliance before comparing prices
-
3. Ask about Zigbee OEM and ecosystem compatibility
-
4. Get a line-item quote, not a unit price estimate
-
5. Verify lead time and replacement support before payment
-
6. Run the final check against the physical space
-
1. Write down the exact Legrand catalog number, not just 'Legrand switch'
-
Common Mistakes to Avoid
I'm the office administrator for a 280-person company. I manage all facilities and lighting purchases—roughly $110,000 annually across 8 vendors—and I report to both operations and finance. That means I'm the person who gets called when an order is wrong.
If you're buying commercial lighting wholesale for a building you manage, this checklist is for you. Consider it the operational part of a commercial lighting wholesale cost guide—the part that keeps a good price from turning into a bad project. It's not a complete electrical spec. It's the six-step ordering process I use before signing off on Legrand light switches, sensors, ceiling lights, or any order that has to arrive correct the first time.
Five minutes of verification beats five days of correction. I learned that the hard way.
The vendor failure in March 2023 changed how I think about lighting orders. One missed lead-time detail delayed a tenant move-in by eleven days. That was the day this checklist started to matter.
When This Checklist Helps
Use this when you're responsible for purchasing lighting controls and fixtures for a renovation, tenant improvement, or planned maintenance. It's also useful if you're comparing a Legrand light switch sensor against a generic alternative and need to know what to ask before prices matter.
Skip it if you're just replacing one switch and can read the model number off the current wall plate. This process is for orders where a mistake costs real money.
The Six-Step Ordering Checklist
1. Write down the exact Legrand catalog number, not just 'Legrand switch'
'Legrand light switch' is not a product. It's a category with dozens of options. On a recent order, we specified a dimmer with sensor and almost ended up with a motion switch that had no dimming function. Actually, it did have a dimming function, but it was a preset dimmer, not a full-range 0-10V dimmer. That detail mattered because our LED drivers needed 0-10V control.
Before asking for a price, write out:
- Catalog number from the project electrical schedule
- Sensor type: occupancy, vacancy, dimming, or manual-on
- Load type and voltage rating: 120/277V, 0-10V dimming, line or low voltage
- Finish and wall plate requirement
- Zigbee OEM or stock Legrand version, if relevant
If you can't fill these lines, ask the distributor to confirm with the specifier. Don't let the vendor guess.
2. Check code and program compliance before comparing prices
In most commercial buildings, the first question is not 'Does it work?' but 'Does it meet the energy code for this space?' We do a lot of projects in California, so I look at Title 24, Part 6. For national projects, ASHRAE 90.1 and the IECC also set requirements for occupancy sensors, vacant-room controls, and light reduction controls.
I'm not a code official, but I know to ask whether the Legrand light switch sensor has the right occupancy or vacancy sensor listing for the application. If the project needs utility rebates, I also check whether the ceiling light fixture might need to be DLC-listed.
Reference: DLC Technical Requirements and Title 24, Part 6, Section 130.1 define the control requirements for commercial lighting. Check the version that applies to your state and project year.
This step slows things down. That's intentional. A batch of non-compliant controls can't be returned after installation. What looks like a $5 per unit savings upfront can become a $20,000 change order later.
3. Ask about Zigbee OEM and ecosystem compatibility
If you're ordering wireless controls, 'Zigbee' is not one interchangeable thing. We once considered a Zigbee OEM model because we wanted private-label packaging and a specific sensor configuration. The distributor said, 'It's Zigbee, it will work.' That's not a technical answer.
Zigbee is a standard, but device profile and cluster support dictate which gateway or controller it talks to. Ask for the Zigbee cluster library and application layer version. For a Legrand product, confirm from the current specification sheet whether it's Zigbee 3.0 or a proprietary profile. That doesn't make Zigbee bad. It means 'works with Zigbee' is not enough.
Also ask the OEM/private-label question: Is this a stock Legrand product, or will it ship under our brand? That changes packaging, warranty, and lead time. At least, that's been my experience.
Don't hold me to this, but I think most current Legrand wireless devices support Zigbee 3.0. Verify that against the manufacturer's documentation, because revisions happen.
4. Get a line-item quote, not a unit price estimate
We once accepted a quote that said 'lights and controls — $14,800.' That's fine until someone asks what was actually included. A line-item quote should show each catalog number, quantity, unit price, extended price, freight, tax, and minimum order quantity.
The vendor who couldn't provide proper invoicing cost us $2,400 in rejected expenses. They sent a handwritten receipt instead of an itemized invoice. Finance rejected the expense report, and I had to cover it from the department budget. Now I confirm the invoice format before placing any order.
Wholesale price is only part of the cost. In April 2026, I compared distributor quotes on a 40-fixture order and saw a 9% difference in unit price, but the lower-quote vendor added a $400 freight fee and a 15% restocking fee. The 'more expensive' quote was about 6% cheaper overall. Prices shift, so I won't quote exact dollars here. The point is to compare total landed cost, not sticker price.
5. Verify lead time and replacement support before payment
Lead time is the hidden killer. The surprise wasn't the price difference. It was how much hidden value came with a vendor that answered technical questions quickly—support, revisions, quality guarantees. In 2024, two vendors quoted the same Legrand switch. One said 'in stock.' The other said 'four to six weeks.' I chose the in-stock vendor without asking a second question. The order arrived with the wrong trim color, and the replacement took six weeks. The slower vendor had shipped correctly on a different project.
Ask about the return process before you order. What happens if a sensor fails or a fixture arrives damaged? Who covers freight on replacements? What is the restocking fee? Those answers tell you more about the wholesale supplier than the unit price does.
6. Run the final check against the physical space
This is the easiest step to skip and the most expensive to miss.
Before approving payment, walk through the floor plan and confirm:
- Does the switch or sensor location match a wall box that exists?
- Does the ceiling light fixture type match the mounting condition—grid, drywall, or surface?
- Do the sensors have the correct coverage pattern for the room size?
- Is there a neutral wire in the switch box for connected controls?
I didn't fully understand the value of that last question until a $3,000 order of dimmers arrived for a space with no neutral wires. The electrician caught it before installation, but we still paid restocking and shipping.
That mistake created the 12-point checklist I now use for every order. Since then, we've avoided roughly $8,000 in potential rework. It's not magic. It's checking before paying.
Common Mistakes to Avoid
After processing 60–80 orders every year, I keep seeing the same four mistakes.
- 'Ceiling light' is not enough. A troffer, recessed downlight, and surface-mount fixture have different housings and drivers. Put the exact fixture type in the order.
- Don't assume 'sensor' means 'occupancy sensor.' A vacancy sensor requires manual-on; an occupancy sensor turns on automatically. The difference affects code compliance and how people react to the space.
- Beware of open-ended compatibility promises. Any vendor who says something 'works with every system' is not checking your actual project. Use the spec review process instead.
- Keep the quote and spec sheet together. When a question comes up later, you'll need to prove what was approved.
This checklist won't make you a lighting engineer. It will catch the predictable problems that turn into rework. In my experience, that's where the money goes.